05. EPOXIES

01. B. E. C. A. – 555 – H. THICK LAYER TAR EPOXY WATERPROOFING AND INTERMEDIATE LAYER EPOXY POLYAMIDE 2 / WITH HIGH THICKNESS
• DEFINITION: Finish-Primer two-component Epoxy / Polyamide Tar-made type, formulated for achieve high thicknesses of dry film.
Datasheet:
02. EPOX 66
• DEFINITION: Is an epoxy coating curing with polyamides, high-solids content, formulated to protect steel and concrete.
Datasheet:
03. EPOX - 2.000 EPOXY ENAMEL – 2 / C
• DEFINITION: Enamel of two components made of epoxy resins and catalyzed with polyamide.
Datasheet:
04. LAMINAR ALUMINUM EPOXY – 2/C
• DEFINITION: Multifunctional coating based on modified epoxy resins and pigmented with aluminum, with a high solid content which allows for high film thickness per hand applied paint.
Datasheet:
05. EPOXI S-D 2505 EPOXY COATING HIGH THICKNESS. SOLVENT FREE
• DEFINITION: Epoxy coating based on 2 components without solvent. It can be applied to high film thickness in a single layer, using the appropriate application equipment.
Datasheet:
06. EURO 2.000 P.A. 2 COMPONENTS SELF-LEVELLING PAINTING
• DEFINITION: Painting made from epoxy resins, which gives it great resistance to abrasion and traffic, providing a very compact and smooth coating. It is very suitable for industrial and decorative flooring.
Datasheet:
07. EUROEPOX -SK 2/C SPECIAL PAINT FOR SOIL TYPE EPOXY. HIGH RESISTANCE
• DEFINITION: Painting of two components Epoxy-type special for floor formulated for a good mechanical strength, chemical, etc.
Datasheet:
08. EUROWELD JM 555
• DEFINITION: It is an inorganic alkyd-silicate Shop Primer zincs based, self- curing, consistent in one painting of 2 components that must be mixed before application then keep stirring continuously.
Datasheet:
09. FONDEUROPOX-SK 2/C SPECIAL SEALER FOR EPOXY TYPE FLOOR.
• DEFINITION: Two-component sealant Epoxy type made to achieve good adhesion for the subsequent epoxies or polyurethanes application coatings.
Datasheet:
10. FOS - EPOX - 60 ANTICORROSIVE EPOXY ZINC PHOSPHATE PRIMER 2 COMPONENTS
• DEFINITION: 2 components primer that need to mix and perfectly homogenize, stirring well both components during 5 minutes.
Datasheet:
11. FOS - EPOX - 60 - G 2/C ANTICORROSION PRIMER EPOXY ZINC PHOSPHATE 2 COMPONENTS
• DEFINITION: 2 components primer that need to mix and perfectly homogenize, stirring well both components during 5 minutes.
Datasheet:
12. IMEFOZ- 676- A.E. ZINC PHOSPHATE EPOXY PRIMER 2/C HIGH THICKNESS POLYAMIDE EPOXY
• DEFINITION: Two components primer epoxy-polyamide-types, formulated to achieve high thicknesses of dry film. It is ideal base for thixotropic treatments.
Datasheet:
13. PRIMER RICH IN ZINC EPOXY 2/C
• DEFINITION: Anticorrosion two components primer made from epoxy resins, polyamides catalyzed, using micronized zinc powder as pigment in high proportion.
Datasheet:
14. IMPRIPOX - HB - 777 POLYAMIDE EPOXY 2/C HIGH THICKNESS
• DEFINITION: Two component primer polyamide-epoxy-types, formulated to achieve dry film high thicknesses.
Datasheet:
15. IXIMA 2/C NZ C12
• DEFINITION: It is an anticorrosive primer based two component epoxy polyamide, with excellent mechanical strength, high adhesion to all types of galvanized and fast drying.
Datasheet:
16. POLI-EPOX-227 POLYESTER-EPOXY ENAMEL FINISH
• DEFINITION: Two components enamel made based on polyester-epoxy resins and catalyzed with polyamide.
Datasheet:
17. I.R.2-929-T INORGANIC PRIMER ZINC SILICATE
• DEFINITION: It is an inorganic primer zinc-ethyl-silicate of two components, which contains solvents.
Datasheet:
18. S.P.E. 140 - RAPID SHOP-PRIMER EPOXI 2/C IRON OXIDE
• DEFINITION: It is an anticorrosive primer based on two component epoxy polyamide with excellent mechanical strength, high adhesion to all types of Steel and ultra fast drying.
Datasheet:
19. S.P.E. 160 I M1 SHOP-PRIMER EPOXI 2/C IRON OXIDE
• DEFINITION: It is an anticorrosive primer based on two component epoxy polyamide with excellent mechanical strength, high adhesion to all types of Steel and ultra fast drying.
Datasheet:
20. TERMIPOX 801
• DEFINITION: Two-component coating type Epoxy-Polyamide, reinforced with micaceous iron oxide, formulated to achieve high dry film thicknesses.
Datasheet: